Midea M7 Pro cleaning robot

Midea Cleaning Robot M7 Pro

This product from Midea is a 2 in 1 device. It has the function of vacuuming and cleaning surfaces, allowing you to save time. The motor running at 55W and suction power of 4000Pa allow the effective elimination of contaminants from dust to hair. For a better cleaning effect, it uses a mop that generates vibrations at a frequency of up to 500 movements per minute. The LDS laser technology creates an accurate map of the house without skipping or repeating the route. The M7 Pro also overcomes obstacles up to 22mm high and is equipped with over 30 sensors.

Vibrating mop for spotless clean surfaces

Using a vibrating mop provides a much better cleaning result than other models. The M7 Pro uses vibration at 500 beats per minute to thoroughly clean your floor, removing stains and allergens. What's more, you can also set your own water dosage based on the type of surface you're cleaning. And the triple filtration system traps dust to prevent secondary air pollution.

Effective against dirt

It has a brushless motor and a suction power of 4000 Pa, which makes it one of the most powerful vacuum cleaners of its kind on the market! It is also equipped with new software and OTA algorithms, for increased productivity. It effortlessly picks up hair, dander, or dust. You can also vary the suction power, choosing between modes like Silent, Soft, Standard and Max.

Increases power when cleaning carpet

This device automatically increases the suction power to maximum to thoroughly remove the dust in the carpet fibers. The V-shaped brush design prevents hair from getting caught in the brush and is also ideal for cleaning delicate surfaces. In addition, the side brushes scrape dirt from crevices, leaving the surface spotlessly clean.

LDS laser navigation system

Robot uses laser navigation, which allows you to create a precise plan of the apartment. As a result, the device does not move randomly through the rooms, but along a route created by them, where it does not miss a centimeter and does not repeat cleaning in the same areas. In addition, the M7 Pro can also work in the dark.

Intelligent sensors - long working time

The use of anti-collision and anti-skid sensors allows the M7 Pro to avoid obstacles and move freely on any surface. So you don't have to worry about the robot falling down stairs or bumping into furniture. What's more, if the battery is low during cleaning, the device will find a charging station, and after renewing its energy, it will return to the place where it stopped cleaning. The M7 Pro has a run time of up to 150 minutes - enough to vacuum floors with a total area of up to 250m2.

Control the M7 Pro remotely

The app allows you to use your M7 Pro to its full potential. For example, you can select the area to be cleaned or plan the sequence of rooms to be vacuumed. It also remembers the floor plan of several floors, so it is perfect for larger homes. Your kid is asleep and you don't want to wake him up? Set a virtual wall to exclude the selected surface from cleaning. The robot is also compatible with the Amazon Alexa assistant, so you can operate it with voice commands.

Easy to maintain

The benefits of the M7 Pro don't end there! The device comes with a dust and water tank and a HEPA filter. You can wash all these components under running water and use them again and again. This way you save time and money on buying new parts.

In the box

• Midea M7 Pro Vacuum Cleaner
• Dust container
• Water tank
• 2x Side brush
• 2x Mopping cloth
• 2x HEPA filter
• Charging station
• Power cable
• Cleaning brush
• Quick Start Guide
• User Manual