Helium for balloons, 1 l / 110 bar

Balloons need helium to float. Helium is suitable for filling both latex and foil balloons. The disposable helium balloon is lightweight and portable, with a balloon filling nozzle. The amount of helium used depends on the size of the balloons. After filling the balloon, close the balloon tap properly and reuse the balloon next time until it is empty. The cylinder contains helium to fill about 100 l. Balls with a capacity of less than 6 liters should not be inflated, as they are unlikely to rise into the air. The smallest ball that rises into the air is 20 x 30 cm. About 17 such balls can be inflated. In balloons marked with the helium symbol, the helium stays inside longer than in ordinary balloons. USE: Never open the cylinder valve without the regulator installed. Unscrew the protective cap from the cylinder valve. Gently screw the filler nozzle onto the cylinder valve by hand until it is tight against the valve collar. Place the neck of the balloon over the inflator so that the helium cannot escape between the balloon and the inflator. Hold the neck of the balloon firmly on the inflator and gently press down on the handle to allow the helium to exit the balloon smoothly. To stop full pumping, release the handle of the filling nozzle. Remove the balloon by squeezing its neck tightly. When you have finished inflating the balloons, unscrew the inflation nozzle from the balloon valve and screw the protective cap back on. WARNING! Contains gas under pressure. May explode if heated. Store in a well-ventilated place. The tank has been tested with a pressure of 165 bar! Store away from sunlight and at temperatures up to 50°. Do not crush or burn the cylinder after use! Do not spray into flames or ignition source. Asphyxiating in large quantities. Do not inhale! Keep out of the reach of children. Shelf life: 5 years from the date of manufacture (see on the top of the gas cylinder). Take the empty bottle to the nearest collection point. Distributor: / www..ee